This category contains 31 blocks.
Big_Slider_Stream - Click and drag the puck to change the state of the Stream output from 0 to 1.
Button - Pushing the button will emit a number from the Jolt output, number is set by the Stream input.
Button Back - Push the button to emit a value of 1 out of the Jolt output.
Button Help - Push the button to change the state, emitting 0 or 1 when switching states.
Button Play - Push the button to change the play/pause state, emitting 0 when switching to pause and 1 when swi...
Button Reset - Push the button to emit a value of 1 out of the Jolt output.
Button Skip - Push the button to emit a value of 1 out of the Jolt output.
Collider - Used to build devices that interact with physics-enabled blocks, e.g. mallets and beaters.
Dial - Click & drag up/down, or click & twist your hand left/right, or use the joystick up/down to chang...
Fader - A slider that be used to control various things via Jolt connections.
Jolt Dial - Jolt input with a dial around it. Sets and instantly triggers any number changes from the Jolt ou...
Knob - Click and drag up/down, or twist you hand while clicking to change the knob position from 0 to 1.
Knob Num - Click and drag up/down, or twist you hand while clicking to change the knob position from 0 to 1.
Number - Set and instantly trigger any number from the Jolt output.
Number Readout - Displays numbers sent into the Stream/Jolt input.
Used for building interfaces, debugging and le...
Numpad - Tap the numeric keypad to set a desired number, tap Enter to emit it from the Jolt output.
Pad - A pad you can hit; sends a trigger and the hit position on the pad.
Progress Toggle - Tap to toggle off/on state, sending 0 or 1 from the Jolt output.
Selector Dial - Click & drag in the direction of the desired section to select it, or, use joystick up/down to cy...
Slider - Touch, click & drag, or use the joystick up/down, to send the position of the slider from the Jol...
Slider Jolt - A liner slider that can be used to control all sorts of stuff.
Stepped Dial - Use joystick up/down, or, click & drag in any direction to change current step. When a step is ch...
Stream Dial - A Stream input/output with interactive dial. Receives, stores, and continiously outputs any recei...
Stream_switch - Click the switch to change off/on state, sending 0 or 1.
Toggle - Hit or click inside to change off/on state, sending 0 or 1 by default from the Jolt output.
Toggle Jolt - A switch that can be toggled on and off.
Trigger - Hit or click to trigger a number (default 1) from the Jolt output.
Value - Hit the sphere, or send a Jolt to the input to emit its value.
Set the value that will be emitte...