¶ Selector Dial
Category: 🎚️ Interfaces
¶ Description
Click & drag in the direction of the desired section to select it, or use joystick up/down to cycle through the sections clockwise. Configure sections in this block's inspector.
Useful to create very readable interfaces that can trigger several different numbers or options, in a non-continuous manner (i.e. selecting waveform, presets, octaves). Configure the number of available steps in this block's inspector.
¶ Inputs, Outputs and Parts
¶ Inputs
| Name | Type | Description |
|---|---|---|
| Set & Trigger | Jolt Input | Selects the section based on incoming index. E.g. receiving 0 will select the first section of the dial and trigger that section's value from the Jolt output. To connect another block here, click & pull on any Jolt output to create a wire and drag it here. |
¶ Outputs
| Name | Type | Description |
|---|---|---|
| Section Value | Jolt Output | Emits the value of a section when changed. Click & pull to generate a new Jolt wire. |
¶ Others
| Name | Type | Description |
|---|---|---|
| Select | Selector | Click & drag toward a section to select it. Emits the value corresponding to the selected option (starting from index 0). |
¶ Inspector Controls
| Name | Type | Description |
|---|---|---|
| Section Count | integer | Number of sections on the dial (2 to 20). Adding or removing sections creates or trims the Label / Value entries below. |
| Label #0 | text_input | Display label shown on this section of the dial. |
| Value #0 | text_input | Number emitted from the Section Value output when this section is selected. |
| Label #1 | text_input | Display label shown on this section of the dial. |
| Value #1 | text_input | Number emitted from the Section Value output when this section is selected. |