This category contains 22 blocks:
- bar - a
- counter - Counts the sum of incoming jolts values.
- delay_jolt - Delay a jolt by some amount of time.
- frequency_analyzer -
- hammer -
- karplus_strong -
- karplus_strong_extended -
- knob - A knob.
- ladder - A 24 dB/oct (four-pole) bandpass-like filter, with center frequency and resonance settings.
- limiter - Applies brick wall limiting to the incoming signal, to control the amplitude.
- linearladder - Frequency bandpass filter.
- lowpass_old - Low pass filter.
- onepole - 6 dB/oct (one-pole) low-pass filter.
- pink_noise - Pink noise generator, outputting a signal with 1/f^a energy across the frequency spectrum.
- plate - plate filter : input, freq, hammerX, hammerY, freqDedLoss, freqInDepLoss
- pluck -
- pulse - Outputs a pulse with a duration set by the duration input. A pulse is a stream with a value of on...
- rms - Calculates the root mean square of the incoming signal over a period of time. For example can be ...
- scope - Displays signal data.
- speaker - This is your sound source. Speakers translate the values of what you are building into audio.
- string_with_output - A physcal model of a string that can interact with marbles and your controller. Has a stream outp...
- violin - Violin physical model generator